1.0 OBJECTIVE
To provide the procedure for the determination of Atenolol in tablet dosage form
2.0 SCOPE
This procedure is Applicable to the determination of Atenolol in tablet dosage form
3.0 RESPONSIBILITY
3.1 QC-Chemist
4.0 ACCOUNTABILITY
4.1 Executive – Quality control
4.2 Head – Quality control
5.0 PROCEDURE
5.1 Label Claim:
Each Uncoated tablet contains:
Atenolol IP 12.5/25/50/100mg
5.2 Assay Method:
5.21 Preparation of standard solution:
Dissolve 100mg of the Atenolol in 50ml of 0.1N hydrochloric acid and
further diluted to 100ml with 0.1N hydrochloric acid.
Further dilute 1ml of the above solution into 10ml with 0.1N hydrochloric acid.
5.2.2 Preparation of Sample solution:
Weight powder twenty tablets and take the powder equivalent
to100mg Atenolol was accurately weighed, dissolved in
100 ml of 0.1N hydrochloric acid, filtered through Whatmann filter paper No: 41. .
Further dilute 1ml of the above solution into 10ml with 0.1N hydrochloric acid.
5.2.3 Measure the absorbance at about 225nm
5.2.4 Calculate the content by
comparison.
Sample absorbance x Standard weight x Assay x Average
weight of the tablet =
Standard absorbance x Sample Weight x
100
= ____________x100
LC
LC: Label Claim
6.0 ANNEXURES
Nil
0 Comments